At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
A small damp spot often means the siding is failing, allowing moisture to seep deeper behind the surface here. Our team strips away the compromised material to find the source before it threatens your home’s frame.
If it has been years since the last refresh, fading and cracks can invite rain inside. A new coat on the exterior brightens curb appeal and seals gaps, preventing damp weather from taking hold.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Drywall Installation Burnaby Drywall Board Type | Drywall Taping Burnaby Price | Drywall Mudding Burnaby Price | Level 4 Finish Burnaby Price | Level 5 Finish Burnaby Price | Ready For Paint Burnaby Price | Drywall Sanding Burnaby Price |
|---|---|---|---|---|---|---|
| Fire-Rated Type X Drywall | CAD 30 – CAD 40 | CAD 30 – CAD 40 | CAD 40 – CAD 50 | CAD 50 – CAD 60 | CAD 40 – CAD 50 | CAD 30 – CAD 40 |
| Standard Half-Inch Drywall | CAD 20 – CAD 30 | CAD 20 – CAD 30 | CAD 30 – CAD 40 | CAD 40 – CAD 50 | CAD 30 – CAD 40 | CAD 20 – CAD 30 |
| Specialized Drywall Boards | CAD 30 – CAD 50 | CAD 40 – CAD 50 | CAD 50 – CAD 70 | CAD 60 – CAD 100 | CAD 50 – CAD 70 | CAD 40 – CAD 50 |
| Moisture-Resistant Green Board | CAD 20 – CAD 30 | CAD 20 – CAD 30 | CAD 30 – CAD 40 | CAD 40 – CAD 60 | CAD 30 – CAD 40 | CAD 20 – CAD 30 |
| Soundproof Acoustic Drywall | CAD 40 – CAD 60 | CAD 50 – CAD 70 | CAD 60 – CAD 90 | CAD 90 – CAD 130 | CAD 60 – CAD 90 | CAD 50 – CAD 70 |
Preventing moisture damage
When water gets into exterior walls, it can cause damage behind the siding and trim. Our team removes the damaged sections, dries everything properly, and installs new moisture-resistant boards that connect to your existing weather barrier.
Every repair ends with primed and painted surfaces that are flush with the surrounding wall—no dips or seams showing through. This stops the damp cycle so your siding and trim stay in good shape. We manage this entire process across Metro Vancouver, from precise drywall in Vancouver to matching the final exterior finish.
Burnaby experiences heavy winter rain from the North Shore mountains. Many homes built from the 1960s to the 1980s often have exterior sheathing that isn’t designed for that level of moisture. When water saturates a wall, paint can blister and siding may buckle within a season.
Homes near Burnaby Lake and along the slope to Metrotown face extra runoff and morning fog that keeps walls damp longer. We replace the old materials with dense glass-mat panels and vapour-permeable WRBs that handle water much better in most Burnaby houses.
Drywall repair process
When we repair exterior drywall on homes in Burnaby, we cut out the damaged areas and check for hidden rot. We use dense glass-mat gypsum boards, like DensGlass Sheathing, which have a fiberglass face that resists moisture better than regular drywall. These boards are attached to the studs with corrosion-resistant screws, and we stagger the joints to reduce stress points.
We tape and finish the joints with a strong setting-type compound that hardens and resists dampness. After sanding the compound smooth, we apply an acrylic latex exterior primer and two coats of 100% acrylic paint to seal the surface. This process creates a barrier that won’t soften or blister, even in Burnaby’s wet weather.
A strong building envelope in Burnaby needs a continuous drainage plane behind the siding. When we replace a section of sheathing, we carefully cut back the existing weather-resistant barrier and install a new piece that overlaps the lower layer and goes under the upper layer. This directs any water that gets past the siding outward. We tape all seams with sheathing tape to keep water from getting in.
We also make sure the assembly can dry to the outside. Glass-mat sheathing lets moisture vapor from inside the wall escape instead of condensing inside. With a rainscreen gap between the siding and the weather-resistant barrier, this design stops trapped moisture that could rot the framing during Burnaby’s long rainy seasons.
Drywall permit requirements in Burnaby
For a home in Burnaby, any construction or change to building walls that is regulated by the Building Code, like adding, removing, or changing drywall as part of an exterior renovation, needs a building permit from the City of Burnaby before work starts. Minor non-structural repairs do not need a permit, but larger changes related to exterior remodeling must go through the permit application process and meet Building Code standards.
For residential properties in Burnaby, drywall work that is part of a bigger project, such as changes to exterior walls, additions, or fire repairs, usually needs a building permit. This permit must be applied for through the City’s My Permits Portal. Minor tasks like painting or small non-structural exterior repairs do not require a permit.
Drywall installation and related construction work in Burnaby must follow the city’s noise rules. This work is allowed only between 7:00 a.m. and 8:00 p.m. Monday to Friday, and between 9:00 a.m. and 8:00 p.m. on Saturdays. No work is allowed on Sundays or statutory holidays. Noise levels must also stay within the limits set by the bylaw when measured at certain distances from the source.
