At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
In Metro Vancouver’s damp climate, drafts let moisture seep into window frames, rotting the wood. This leads to costly repairs and structural damage. Replacing old windows stops that cycle.
New windows and doors enhance your home’s curb appeal with clean lines and modern finishes. Upgraded locks improve security against break-ins.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Windows and Doors Replacement Window or Door Type | Standard Grade Prices | Premium Grade Prices | Luxury Grade Prices |
|---|---|---|---|
| Windows and Doors | CAD 800 – CAD 1,500 | CAD 1,500 – CAD 2,800 | CAD 2,800 – CAD 6,000 |
| Exterior Door Installation | CAD 900 – CAD 2,000 | CAD 2,000 – CAD 4,500 | CAD 4,500 – CAD 12,000 |
| Window and Door Capping | CAD 120 – CAD 250 | CAD 250 – CAD 450 | CAD 450 – CAD 850 |
| Window and Door Flashing | CAD 90 – CAD 200 | CAD 200 – CAD 380 | CAD 380 – CAD 750 |
| Window Installation | CAD 600 – CAD 1,200 | CAD 1,200 – CAD 2,400 | CAD 2,400 – CAD 5,000 |
Stop Cold Drafts
Cold drafts and high heating bills mean your windows and doors need work. New energy-efficient units stop air leaks.
Paragon Exteriors replaces your home’s windows and doors the right way. Our team installs them tight so Vancouver’s damp stays out and your home stays warm all year long.
Paragon Exteriors replaces windows and doors for homeowners in Heritage Mountain. Old frames let drafts in here just like they do in Vancouver.
On Heritage Mountain, worn paint or cracked siding makes a home look neglected. New windows and doors, plus fresh exterior paint, make your home look clean and well-kept.
Window and Door Materials
Vinyl frames resist Vancouver’s damp climate without rotting. Fiberglass units expand at nearly the same rate as glass, which helps prevent seal failure. Double- and triple-pane insulated glass uses low-E coatings and warm-edge spacers to reduce condensation. Argon or krypton gas fills slow heat transfer without adding extra weight.
Casement windows seal tighter than sliding windows because the sash locks against the frame with continuous compression gaskets. Entry doors often combine fiberglass skins with polyurethane foam cores for strength and thermal insulation. Hardware and weatherstripping materials can handle frequent wet-dry cycles.
Installation uses sloped sill pans, flexible flashing tapes, and minimally expanding foam to isolate the rough opening. Shims at anchor points support the unit’s weight without bending the frame, keeping the glass and seals aligned for many years.
The rough opening must connect with the wall’s drainage system to direct any water that gets past the cladding outward. Head flashings with end dams and sloped sills create a path that sheds water away from the opening. Tape flashings overlap in a way that prevents water from getting behind the mounting flange.
Fastening patterns secure the unit at specific points while allowing the frame to expand and contract. This avoids bowing that could break the air seal. Backer rod and high-quality sealant fill the gap between the window and the sheathing, forming a strong air and vapor barrier.
Thermal breaks in the frame and low-conductivity spacers interrupt heat flow through the assembly. When combined with continuous exterior insulation, this reduces the risk of interior surface condensation, which is a common issue in coastal areas when warm indoor air meets a cold window edge.
Permit Requirements
In the City of Vancouver, you need a permit to replace or change window and door assemblies. This rule does not apply if you are only replacing units in existing framed openings of one- and two-family units and no fire-resistive rating is needed.
The City of North Vancouver requires a building permit for any construction or changes to a building. You must get written approval from the City before installing exterior shutters or closures over windows or doors.
In the City of Richmond, if you are working on protected heritage properties, you can replace a door or window without changing the frame. This is a heritage alteration permit exemption. However, most exterior changes to protected heritage properties need a heritage review or a heritage alteration permit.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
