At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
Swelling and peeling are just the beginning. Once rain penetrates deteriorated fascia, it tracks into the wall cavity, causing unseen damage.
Regular maintenance is essential to protect your home from the elements. Capping fascia in prefinished metal prevents the cycle of scraping and repainting, keeping your exterior looking sharp for years.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Fascia Capping Burnaby Capping Material | Quick Clean Installation Price | Difficult Access Installation Price | Elevated Fascia Installation Price | Asbestos Present Installation Price | Scaffolding Required Installation Price |
|---|---|---|---|---|---|
| Color-Matched Aluminum Trim | CAD 40 – CAD 70 | CAD 60 – CAD 110 | CAD 60 – CAD 110 | CAD 80 – CAD 140 | CAD 80 – CAD 140 |
| Standard uPVC Capping | CAD 30 – CAD 60 | CAD 50 – CAD 90 | CAD 50 – CAD 90 | CAD 70 – CAD 120 | CAD 70 – CAD 120 |
| Materials Only Supply | CAD 30 – CAD 50 | CAD 40 – CAD 80 | CAD 40 – CAD 80 | CAD 60 – CAD 100 | CAD 60 – CAD 100 |
| Standard Capping Board | CAD 40 – CAD 70 | CAD 60 – CAD 110 | CAD 60 – CAD 110 | CAD 80 – CAD 140 | CAD 80 – CAD 140 |
| Standard Aluminum Capping | CAD 40 – CAD 70 | CAD 60 – CAD 110 | CAD 60 – CAD 110 | CAD 80 – CAD 140 | CAD 80 – CAD 140 |
Prevent Water Damage
Peeling paint on the outer fascia boards shows that they are holding too much water. If left unprotected, that moisture seeps deeper into the wood, causing the swelling homeowners notice from the street. Capping the board changes everything.
Custom fascia capping in Vancouver covers the original board with aluminum shaped on site for a snug fit. Rainwater flows off the metal instead of soaking into the wood. Homeowners get a clean, low-maintenance edge that stays bright through wet weather.
In Burnaby, the wet and cool climate keeps exterior wood damp for months. This is why exposed fascia here tends to soak up more water than homeowners expect. Capping provides a dry surface before a small crack turns into a bigger repair.
Areas on the North Burnaby slopes often face extra wind-driven rain, while older homes near Central Burnaby still have original wood trim. In both cases, the aluminum cap creates a strong edge that directs water away during the wet season. This keeps the exterior looking good without the need for constant scraping and repainting.
Fascia Capping Techniques
We use custom aluminum coil, usually 0.024-inch gauge with a baked-on finish, that arrives flat. Installers shape it on site with a portable brake. The metal is bent to match the existing fascia board’s face and bottom return. It has a hemmed edge for strength and a clean look. This on-site shaping helps the cap fit the curves of Burnaby’s older wood trim, ensuring it sheds water quickly.
Installers attach the cap with color-matched trim nails. They drive the nails through the bottom leg or into the shadow line, keeping the front free of visible holes. Seams overlap away from the wind, and the bottom edge is angled out to create a drip leg that directs water into the gutter. In Burnaby, where rain can be strong, the top edge is sealed against the roof deck to stop moisture from getting behind the cap.
The aluminum cap forms a continuous drainage plane over the wooden fascia. This stops moisture from soaking into the sub-fascia and rafter tails. In Burnaby’s wet climate, the cap’s drip edge helps channel water into the gutter instead of letting it run down the board. This design keeps the roof edge dry during long rainy periods.
It’s important to integrate the fascia cap with the roof’s metal drip edge. The cap is either tucked behind the drip edge or lapped over it, depending on the roof pitch, to move water outward. Fasteners are only placed on the underside to reduce entry points. A small gap at the soffit allows air to circulate and prevent condensation behind the cap.
On sloped lots in Burnaby, wind can push rain upward. Therefore, the cap’s top edge must be flashed or sealed to resist that pressure. The aluminum’s slight flexibility allows for thermal movement without breaking the water barrier, keeping the wooden trim dry even during the area’s long wet spells.
