At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
Cracks in stucco here allow rain to seep in and rot the wood beneath. Left unchecked, that moisture can compromise your exterior for years. A weather-sealed system prevents water from reaching the framing.
This finish also provides a clean, modern look that enhances curb appeal. It resists fading and maintains its color through wet winters and sunny summers, ensuring your exterior remains sharp with minimal upkeep.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Stucco Installation Burnaby Stucco System Type | Standard Sand Float Acrylic Price | Coarse Dash Elastomeric Coating Price | Smooth Trowel Premium Acrylic Price |
|---|---|---|---|
| Traditional Three-Coat Stucco | CAD 6,000 – CAD 16,000 | CAD 6,500 – CAD 17,000 | CAD 6,500 – CAD 17,500 |
| Rainscreen Acrylic Stucco System | CAD 7,000 – CAD 18,000 | CAD 7,500 – CAD 19,000 | CAD 7,500 – CAD 20,000 |
| Exterior Insulation Finish System | CAD 8,000 – CAD 21,000 | CAD 8,500 – CAD 22,000 | CAD 8,500 – CAD 23,000 |
| Two-Coat Synthetic Stucco System | CAD 5,500 – CAD 14,500 | CAD 6,000 – CAD 15,500 | CAD 6,000 – CAD 16,000 |
Durable Stucco Solutions
Moisture that gets behind cracked stucco keeps causing problems long after the surface dries. Paragon Exteriors sees stucco as a full exterior system, not just a cosmetic layer. That is why homeowners choose our stucco in Vancouver when hidden rot is a concern.
We remove damaged areas, fix the underlying structure, and rebuild with weather-sealed stucco, proper flashing, and drainage paths. The finished surface sheds rain while the wall behind it stays dry. You get a low-maintenance exterior that withstands wet winters without constant repairs.
Burnaby experiences long, steady rain in fall and winter, which pushes water into every small crack. Older stucco homes here often lack the drainage features that modern systems have. In this climate, your exterior cladding must act as a true weather barrier.
Much of the local housing was built in the 1960s and 1970s, when stucco was popular but sealing standards were lower. Rainy winters and temperature changes can widen hairline cracks quickly. Paragon Exteriors prepares for these conditions with stronger flashing and flexible exterior coatings.
Stucco Installation Techniques
Removing old stucco from a house in Burnaby lets us check the sheathing for moisture damage caused by years of wet weather. We cover the wall with a two-layer water-resistive barrier. This usually includes building paper and a drainage mat or fluid-applied flashing at all openings. This setup creates a drainage plane that directs water away from the framing to prevent rot.
We attach metal lath over the barrier to give the stucco a strong grip, especially around windows and corners where stress builds up. The three-coat system includes a scratch coat, a brown coat that is leveled to about ¾ inch thick, and a finish coat. This method helps resist cracks due to its mass and the gradual curing in Burnaby’s damp air. We often recommend an acrylic-modified finish because it can flex and cover small cracks that might open with temperature changes.
Custom-bent metal flashing caps the tops of windows and doors, while sill pans catch any water that seeps behind the outer layer and guide it out over the lower stucco. At the base of the wall, a weep screed with a kick-out ensures moisture drains freely instead of pooling inside the wall cavity.
In Burnaby’s climate, indoor moisture vapor moves outward through the walls during the cooler months. A well-designed stucco system uses a vapor-permeable outer layer so this moisture can escape outside instead of condensing behind the cladding. The drainage plane behind the stucco, made by the textured surface of the water-resistive barrier or a dedicated air gap, also provides a barrier that prevents any liquid water from touching the sheathing.
The pattern of fastening the metal lath is crucial for strength during high winds, which are common along the coast. Staples or nails are driven into the studs at close intervals, turning the stucco into a continuous tensioned membrane that resists wind pressure. This mechanical bond, along with the weight of the cement mixture, gives the exterior a strong shell that can handle Burnaby’s stormy weather without separating from the building.
Flashing details work with the drainage plane to manage water at every interruption. A pan flashing at a window sill collects any water that gets past the head or jamb seals and directs it out through the weep screed below. This layered water management strategy follows modern building science principles, adapted specifically for the frequent and persistent rain in the Pacific region.
