Menu
Our Services
Outdoor Living
Roofline & Water
Walls & Envelope
Menu
Our Services
Outdoor Living
Roofline & Water
Walls & Envelope
At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
Once moisture gets behind the paint, it soaks into the wood and rots it, often without you noticing until it’s too late. Capping fascia boards here stops that cycle for good.
Capping also enhances your home’s curb appeal. The aluminum can be colour-matched to your trim, and it won’t fade from the salt air. This project keeps your home looking sharp year after year.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Fascia Capping Steveston Capping Material Type | Per Metre Price | Per Linear Foot Price | Per Linear Metre Price | 15m Wall Price |
|---|---|---|---|---|
| uPVC Capping Over Sound Timber | CAD 80 – 190 | CAD 30 – 60 | CAD 80 – 190 | CAD 1,200 – 2,900 |
| Wood Capping | CAD 100 – 210 | CAD 30 – 60 | CAD 100 – 210 | CAD 1,500 – 3,200 |
| Composite Capping | CAD 110 – 230 | CAD 30 – 70 | CAD 110 – 230 | CAD 1,700 – 3,500 |
| Aluminum-Wrapped Capping | CAD 90 – 220 | CAD 30 – 70 | CAD 90 – 220 | CAD 1,400 – 3,300 |
| uPVC Capping | CAD 80 – 190 | CAD 30 – 60 | CAD 80 – 190 | CAD 1,200 – 2,900 |
Endless Upkeep Solved
Peeling trim shows the need for constant care. Aluminum capping wraps over the wood, creating a waterproof barrier. This stops moisture from soaking in. Once it’s on, you can forget about exterior painting for good.
We bend each piece on-site from thick coil stock to fit your home’s trim perfectly. This custom fit helps water slide off easily, and the finish keeps its color for years. It’s a strong shield for your roofline, and we provide fascia capping in Vancouver with the same careful method.
Steveston’s salt air and winter storms damage exposed wood trim. The wet-dry cycle here makes paint fail faster than in most places, leaving fascia boards soft and weak.
Many homes in this historic fishing village still have original cedar trim that is nearing the end of its life. Capping those boards before rot starts keeps the character of your Steveston property while giving it a clean, sharp look that can handle the rain.
Fascia Capping Techniques
We use thick aluminum coil stock with a factory-applied PVDF coating. This coating resists Steveston’s salt-laden moisture longer than standard polyester finishes. A portable brake bends each length on-site to match the exact angle and depth of your existing fascia board. This custom fit eliminates gaps where water could pool and helps water flow away quickly.
Joints between lengths are lapped in the direction of the wind to block rain driven by the wind. The bottom drip edge has a slight outward kick to break surface tension, guiding water cleanly into the gutter. Fasteners are placed only along the top edge, hidden under the roof’s drip flashing, leaving no exposed areas that could corrode.
Fascia capping serves as a secondary drainage plane for the roof edge. In Steveston’s frequent rainfall, the design must direct water away from the wood underneath without allowing moisture to seep in. The aluminum’s smooth surface and the angled drip edge help minimize moisture retention.
Behind the capping, the original wood fascia stays exposed to air so any moisture can evaporate. The capping is not sealed to the wood; a small gap at the top allows for ventilation. This prevents the rot cycle that Steveston’s damp winters could otherwise speed up.
The fastening pattern considers the thermal expansion and contraction of aluminum, which is important in coastal temperature changes. Clips or slots allow movement without buckling while still resisting wind uplift. This balance of security and flexibility keeps the assembly intact during winter storms.
Permit Requirements for Steveston
For fascia capping work on homes in Steveston, construction noise is only allowed up to 85 dBA measured 15.2 m from the source. Work may occur Monday to Friday from 7:00 a.m. to 8:00 p.m. and Saturdays from 10:00 a.m. to 8:00 p.m. On Sundays and statutory holidays, work is allowed from 10:00 a.m. to 6:00 p.m. only when the work is on a residential building and is done personally by the owner or occupier, not a contractor. This means Paragon Exteriors’ fascia capping operations are limited to weekdays and Saturdays. If a home is in the Steveston Village Heritage Conservation Area, any exterior changes, including fascia capping, need a Heritage Alteration Permit before work begins. Routine exterior maintenance that changes the look of fascias or trims is considered an exterior change; interior-only work does not need this permit. In the Steveston Area Plan’s Development Permit Area, exterior renovations, including fascia work, may need a Development Permit if the cost of changes is $50,000 or more. Renovations under $50,000 in these areas are usually exempt from needing a Development Permit, but properties in the Steveston Village Heritage Conservation Area still need a Heritage Alteration Permit for exterior changes, no matter the cost.
We worked on a local school in Steveston that has several classroom wings and a gym. Years of salt air and rain had caused their fascia boards to peel. This risked moisture getting into their eaves. We capped all the fascia around the campus with custom-formed aluminum. We planned the work in phases so classes could continue without interruption. We also coordinated daily with their operations staff. Now their eaves are sealed and protected. The school no longer has to scrape and paint, and the community does not worry about wood rot or water damage behind the trim.
Local Logistics for Steveston
Fascia capping in Steveston is a regular part of our work, not a special trip. We can get there easily using Highway 99 and Steveston Highway, driving through Richmond. The drive usually takes about 30 to 40 minutes. To help the local economy, we buy materials from stores like Steveston Marine & Hardware.
We fix peeling paint and water damage by capping fascia boards with custom-bent aluminum. This seals out moisture and stops the need for repainting. We use thick PVDF-coated coil stock, bent on-site for a perfect fit. The capping has lapped joints and a drip edge to help shed rain. Steveston’s salt air and storms speed up rot, so capping helps protect historic cedar trim. A Heritage Alteration Permit is needed in the village conservation area, and noise rules limit our work to weekdays and Saturdays. For aluminum-wrapped capping, expect CAD 90 to 220 per linear metre, or about CAD 1,400 to 3,300 for a 15-metre wall. We can easily reach Steveston from our base.
Find answers to common questions about our services, process, and craftsmanship.