Composite Decking Dunbar-Southlands

Long Lasting Composite Decking In Dunbar Southlands

The constant rain in Dunbar leaves wood deck boards swollen, splintered and green with moss.

Paragon Exteriors installs composite decking that shrugs off Dunbar moisture without sanding, staining or splintering.
20+ Years of Service
4.9 ★ · 180 Reviews

Premium Quality

At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.

20+ Years of Experience

With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.

Service With A Smile

Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.

Paragon

Mold on your deck boards

Once the rain soaks in, it’s not just swelling you worry about—it’s the dark patches creeping across the boards, feeding on that trapped moisture long after the sun returns. You can power-wash and bleach, but the spores are already deep where you can’t reach, and next season it returns worse.

In addition to rot, the sun exposure on south-facing yards can warp a plank within a single summer, twisting fasteners loose and making the surface uneven. A synthetic deck built for this area resists that heat without buckling, providing a flat, safe surface that stays cool enough for bare feet.

Paragon Exteriors

We’re eager to chat! Drop us a line for all your exterior needs.

Mon - Sun: 6AM - 6PM

Working Hours

Send Us a Message

Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.

Estimated Composite Decking Costs in Dunbar-Southlands
The table below outlines estimated pricing for composite decking projects across Dunbar-Southlands. Rows display various composite board grades, while columns represent substructure framing types and configurations. Readers can cross-reference material grades with structural framing choices to evaluate estimated project ranges in Canadian dollars.
Composite Decking Prices in Dunbar-Southlands
Composite Decking Dunbar-Southlands Composite Board GradeFraming Height PricesDesign Complexity PricesFoundation Type PricesRailing Style Prices
Standard Composite DeckingCAD 10,000 – CAD 24,000CAD 10,000 – CAD 24,000CAD 10,000 – CAD 24,000CAD 10,000 – CAD 24,000
Mid-Range Composite DeckingCAD 15,000 – CAD 32,000CAD 15,000 – CAD 32,000CAD 15,000 – CAD 32,000CAD 15,000 – CAD 32,000
Trex and TimberTech DeckingCAD 15,000 – CAD 35,000CAD 15,000 – CAD 35,000CAD 15,000 – CAD 35,000CAD 15,000 – CAD 35,000
Capped Composite and PVCCAD 35,000 – CAD 75,000CAD 35,000 – CAD 75,000CAD 35,000 – CAD 75,000CAD 35,000 – CAD 75,000
Premium Grade Composite DeckingCAD 60,000 – CAD 140,000CAD 60,000 – CAD 140,000CAD 60,000 – CAD 140,000CAD 60,000 – CAD 140,000
Pricing figures are estimates based on general market knowledge and reflect typical cost ranges in CAD at the time of publication. Final project quotes may vary depending on individual site conditions, project complexity, material selections, and project timing.

Durable Decking Solutions

That kind of durability isn’t just for Dunbar. Composite decking is made to handle heavy rain and damp conditions across Metro Vancouver. This way, you can skip the endless cycle of sanding and staining.

The boards are made from a mix of recycled wood fibers and plastic. They have a polymer shell that resists moisture, fading, and scratches. For a closer look at our composite decking in Vancouver, you’ll see how this material keeps its color and grip even during the wettest winters.

Local Weather Requires Resilient Decks

In Dunbar-Southlands, heavy rainfall and a mature tree canopy mean wood decks take a beating. Moisture seeps into the boards, causing swelling, rot, and slippery moss that makes the deck unsafe.

Many homes here have spacious backyards with large decks that are important for outdoor living. Switching to composite means you can enjoy that space without the seasonal scramble to power-wash and seal the surface.

Technical Installation in Dunbar

Composite boards used in Dunbar-Southlands have deep wood-grain patterns and a thick polymer cap. This design helps prevent moss growth and provides a good grip during rainy weather. We do not use uncapped first-generation composites because they can soak up moisture and stain in shady areas.

We install the boards with hidden fasteners. This keeps the surface smooth and stops water from pooling around screw heads, which can lead to problems below. We follow manufacturer guidelines for spacing between boards, making the gaps a bit wider to suit our damp climate, where debris can trap moisture.

Proper ventilation under the deck frame is crucial in Dunbar. We raise the structure on footings that meet building codes and leave air gaps at the edges. This allows air to flow and remove moisture before it can damage the framing and cause rot.

Water Management at Deck Interface

The weakest point on any deck in Dunbar is where it connects to the house. We use continuous metal flashing that goes behind the building paper or housewrap and overlaps the ledger board. This creates a drainage path. A small gap or sloped flashing cap helps ensure water does not seep into the wall.

All decking is installed with a slight slope away from the house. This allows rain to run off before it can pool at the door. Underneath, open framing promotes air circulation, and all structural connectors and fasteners are made of stainless steel or double-dipped galvanized materials. This choice helps them resist moisture without losing strength over time.

Dunbar-Southlands Deck Permit Rules

For elevated or attached composite decks in Dunbar-Southlands, a City of Vancouver building permit is generally required when the walking surface sits more than about 60 cm above the ground or the deck ties into the house. These projects are treated as structural additions, so the deck must meet Vancouver’s Zoning and Development and Building By-law rules for setbacks and structural details before construction starts.

If your Dunbar-Southlands property is in a C-1 zone and the composite deck will serve as private open space, City of Vancouver guidelines require the deck platform to have a minimum horizontal dimension of 1.8 m and a minimum area of 4.5 m². Paragon Exteriors designs each composite deck in these zones to meet or exceed those size minimums before permitting.

City of Vancouver zoning schedules and CD-1 bylaws set minimum setbacks from property lines that apply to decks and their supporting structures. In some Dunbar-Southlands zones, these rules may allow a deck to project closer to a lot line than the main building, but the edge and supports still need to follow the specific yard requirements for your property’s zoning.

Community Decking Projects

We worked on a local school in Dunbar-Southlands where the wooden walkways and gathering decks outside several buildings had become slippery and splintered. This was a safety risk for students and staff. We replaced the old walkways with composite decking in phases, working around their daily schedule. This way, we ensured safe access while classes continued. The result was a safer, low-maintenance campus that staff no longer had to block off after wet weather.

Local Decking Logistics

We install composite decking in Dunbar-Southlands regularly. We get to the neighborhood easily using the Oak Street Bridge and Southwest Marine Drive. We pass by places like False Creek and McCleery Golf Course. The trip usually takes about 20 to 30 minutes. This helps us arrive quickly and keep projects on track. While we are there, we support local businesses by getting materials from stores like Blight’s Home Hardware and Dunbar Lumber.

Composite Decking in Dunbar-Southlands

In Dunbar-Southlands, the rain and sun can damage wood decks, causing them to swell, warp, and grow moss. We install composite decking with a polymer cap that resists moisture and fading. We use hidden fasteners and ensure proper ventilation to prevent rot. Our installation includes metal flashing where the deck connects to the house and a slight slope for drainage. For elevated decks over 60 cm, a City of Vancouver permit is needed. In C-1 zones, decks must be at least 1.8 m by 4.5 m². Costs range from CAD 10,000 for standard composite to CAD 140,000 for premium grades, and we can reach Dunbar-Southlands in about 20 to 30 minutes.

Find answers to common questions about our services, process, and craftsmanship.

How much does composite decking cost in Dunbar-Southlands?
Composite decking in Dunbar-Southlands costs between CAD 10,000 for standard composite and CAD 140,000 for premium grade. The final price depends on site conditions, material choices, and how complex the project is.
Our composite boards have a thick polymer cap that resists moisture and stops moss from growing. We also use hidden fasteners and ensure proper ventilation to keep the deck dry and safe.
We install continuous metal flashing where the deck meets the house and slope the deck away from the home to direct water away. All fasteners are stainless steel or galvanized to resist moisture.
In Dunbar-Southlands, a City of Vancouver building permit is usually needed for elevated decks over 60 cm or those attached to the house. In C-1 zones, the deck must be at least 1.8 m wide and cover an area of 4.5 m².
We replaced slippery wooden walkways at a local school with composite decking in phases while classes were in session. This made the campus safer and low-maintenance, and it no longer needed to be closed after wet weather.