Menu
Our Services
Outdoor Living
Roofline & Water
Walls & Envelope
Menu
Our Services
Outdoor Living
Roofline & Water
Walls & Envelope
At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
That draft isn’t just uncomfortable—it forces your heating system to work harder, increasing monthly costs. Over a winter, even a small gap adds up. Moisture can also rot the trim and framing silently.
Installing a new door here enhances security and improves your entryway’s appearance. A solid door with a modern lock provides peace of mind, while a fresh design boosts curb appeal.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Exterior Door Installation Vancouver Door Material and Style | Standard Installation Price | Mid-Grade Unit Included Price | Frame Repair Required Price | With Glass Inserts Price | Hardware and Weatherstripping Price | With Sidelite Added Price |
|---|---|---|---|---|---|---|
| Exterior Door Installation | CAD 1,500 – 4,000 | CAD 1,500 – 4,000 | CAD 2,500 – 7,500 | CAD 1,800 – 5,000 | CAD 1,500 – 3,000 | CAD 2,500 – 4,500 |
| Steel Entry Doors | CAD 2,000 – 4,000 | CAD 2,000 – 4,000 | CAD 2,500 – 5,000 | CAD 2,000 – 4,500 | CAD 2,000 – 4,000 | CAD 3,000 – 5,000 |
| Fiberglass Entry Doors | CAD 3,500 – 7,000 | CAD 3,500 – 7,000 | CAD 4,000 – 8,000 | CAD 3,500 – 7,500 | CAD 3,500 – 7,000 | CAD 5,000 – 8,500 |
| Wood Entry Doors | CAD 4,500 – 10,000 | CAD 4,500 – 10,000 | CAD 5,500 – 12,000 | CAD 4,500 – 11,000 | CAD 4,500 – 10,000 | CAD 6,000 – 13,000 |
| Single Entry Doors | CAD 1,500 – 3,000 | CAD 1,500 – 3,000 | CAD 2,000 – 5,000 | CAD 1,500 – 4,500 | CAD 1,500 – 3,000 | CAD 2,500 – 4,500 |
| French Patio Doors (Double) | CAD 3,000 – 6,500 | CAD 3,000 – 6,500 | CAD 4,000 – 8,500 | CAD 3,500 – 7,500 | CAD 3,000 – 6,500 | CAD 4,500 – 9,000 |
Sealed exterior doors
A warped entry door is more than just an eyesore. It can drag against the frame, stick in damp weather, and raise your heating bill. Replacing it with a modern, well-installed door stops those drafts and keeps moisture outside where it belongs.
The process starts with a full inspection of the rough opening and sub-sill. We fix any rot, square the frame, and set the new door with a continuous seal. This ensures smooth operation all year and an exterior that can withstand Vancouver’s wettest months. For a closer look at how we handle each job, see exterior door installation in Vancouver.
Vancouver’s winter rains are heavy, and a poorly sealed exterior door lets moisture into your subfloor. If the framing stays damp, it can lead to costly structural repairs. A tight, well-flashed installation prevents this problem before it starts.
Many homes in Vancouver still have original doors that were not upgraded for our coastal climate. Swelling wood frames and corroded thresholds are common. Replacing them with a fiberglass or steel door that has a thermal break and full weatherstripping provides a door designed to handle humidity without sticking or peeling paint.
Sill pan and flashing details
In Vancouver’s wet climate, we install a sloped sill pan that extends past the exterior sheathing. We use a strong, pressure-treated sill plate set in a continuous bead of sealant. Then, we flash the jambs with flexible tape that overlaps the house wrap. This setup directs any water that gets past the siding down and out, preventing it from reaching the subfloor.
The door unit is usually fiberglass with a thermal break. This material is chosen because it won’t swell or rot like wood. We shim the frame to make it plumb and square, fastening through the jambs into the framing with corrosion-resistant screws. Low-expansion foam fills the gap between the frame and rough opening. Finally, we install a drip cap over the head trim with end dams to keep rain from tracking behind the siding.
A properly installed exterior door in Vancouver must keep the drainage plane intact. The water-resistive barrier behind the siding overlaps the head flashing, and the jamb flashing overlaps the barrier. This setup directs any moisture on the sheathing outward. A back dam on the sill pan stops water from moving inward under the threshold.
Air leakage is a major cause of moisture problems in coastal climates. We seal the interior side of the frame to the rough opening to create an air barrier. The exterior side remains vapor-permeable to let any trapped moisture dry to the outside. The door’s thermal break helps reduce condensation on the interior frame surface during cold, damp weather.
Wind-driven rain can push water past poorly lapped flashing. We use head flashing with a drip edge and a slight outward slope. All fastener penetrations through the exterior trim are sealed. This layered approach protects the wall assembly from the frequent wetting cycles that happen in Vancouver’s fall and winter.
Vancouver door installation permits
For one- and two-family homes, replacing door assemblies using the existing framed opening and not needing a fire-resistive rating is permit-exempt under Vancouver Municipal Code 17.08.090. Installing an exterior door that changes the framed opening may require a building permit.
Exterior door installation work that creates construction noise is limited to the city’s allowed hours on private property. Construction noise is allowed Monday to Friday from 7:30 a.m. to 8 p.m. and Saturday from 10 a.m. to 8 p.m. No construction noise is allowed on Sundays or holidays unless an exception permit is obtained.
We worked on a local school in Vancouver where the exterior doors on several buildings did not seal properly. Rain was getting under the sills, causing uncomfortable drafts. To fix this, we replaced every exterior door in phases. We planned our work around their daily schedule so classes could continue without interruption. By the time we finished, the buildings were drier and safer. The staff no longer worried about water damage or security.
Local logistics for Vancouver
We install exterior doors in Vancouver often, so getting to you is easy. We travel along Water Street, West Georgia Street, and across Lions Gate Bridge. Most of Vancouver is reachable in about 15 to 25 minutes, depending on traffic. When we need materials, we shop at local hardware stores like Northern Building Supply Ltd and Hewer Home Hardware. This helps keep money in the community. That’s how we prefer to operate.
Warped exterior doors in Vancouver let in rain and cold air. This can raise heating bills and cause rot. We replace them with well-fitted, weather-sealed fiberglass or steel doors that have a thermal break and full weatherstripping to handle the coastal humidity. Our installation includes sloped sill pans, continuous flashing, and sealed frames to keep moisture out of the subfloor, which is important during Vancouver’s heavy winter rains. Most door replacements using the existing opening do not need a permit under Vancouver Municipal Code 17.08.090, and we follow the city’s construction noise hours. Standard installation usually costs CAD 1,500 – 4,000, while fiberglass doors cost between CAD 3,500 – 7,000. We can reach most areas of Vancouver in 15 to 25 minutes.
Find answers to common questions about our services, process, and craftsmanship.