At Wrap4Car, we use premium materials for every project. Choose from a variety of finishes and styles to create a beautiful, long-lasting look for your vehicle.
With decades of expertise serving Boston and surrounding areas, Wrap4Car delivers skilled vehicle wrapping services with precision and care.
Your happiness is our ultimate standard. We treat every vehicle transformation with the utmost care and dedication, ensuring a flawless finish and a worry-free experience because your vision is our top priority.
Paragon
A heavy downpour turns your deck into a no-go zone, warping furniture and inviting moss. This frustrating cycle affects many homeowners in this area.
A sturdy overhead structure can enhance your outdoor space, providing shade for summer barbecues. It also supports string lights or heaters, allowing you to enjoy your backyard well into the cooler months.
We’re eager to chat! Drop us a line for all your exterior needs.
Visit Us
Call Us
Email Us
Working Hours
Let us know how we can assist you! Fill out the form, and we’ll respond within 24 hours.
| Patio Covers Edgemont Village Structure Material | Polycarbonate Panel Patio Cover Prices | Glass Panel Patio Cover Prices | Solid Insulated Patio Cover Prices |
|---|---|---|---|
| Wood-Framed Patio Covers | CAD 2,500 – 7,000 | CAD 10,000 – 18,000 | CAD 15,000 – 40,000 |
| Aluminum Patio Covers | CAD 2,500 – 7,000 | CAD 10,000 – 18,000 | CAD 15,000 – 40,000 |
| Custom Patio Covers | CAD 3,000 – 7,000 | CAD 10,000 – 18,000 | CAD 15,000 – 40,000 |
| Steel-Framed Patio Covers | CAD 2,500 – 7,000 | CAD 10,000 – 18,000 | CAD 15,000 – 40,000 |
Enjoy Your Outdoor Space
A patio cover is more than just a shield—it’s an extension of your home. It allows you to dine, relax, and entertain outside, even when it rains. At Paragon Exteriors, we design and install patio covers that match your home’s exterior while keeping the weather out.
We use low-maintenance aluminum frames and select panels that fit your light and privacy needs, from clear polycarbonate to tinted glass. This creates a dry, cool space where you can leave cushions and furniture outside without worry. For a patio cover installation in Vancouver, our team makes sure every detail suits your home and the local climate.
Edgemont Village is on the North Shore, where fall and winter bring steady rain. This can make decks and patios unusable for months. A covered patio allows you to host barbecues or watch the kids play outside, even when it rains.
The homes here often have large backyards and mountain views. They need a cover that can handle heavy rain and wet snow. Our structures are built to shed water quickly and resist corrosion, so your outdoor space stays inviting all year.
Installation Techniques in Edgemont
In Edgemont Village, we secure patio covers with a solid aluminum ledger attached to the house’s rim joist. We seal it with strong flashing tape that goes behind the existing siding. This makes a watertight seal that directs rain onto the cover instead of into the wall. For freestanding structures, we use concrete footings that go below the frost line, with post anchors that keep the aluminum dry and away from ground moisture.
The cover panels are sloped at least two inches for every ten feet to help shed the area’s regular rain. We use multiwall polycarbonate for better insulation and impact resistance, or tempered glass for clear mountain views. All fasteners are made of stainless steel to prevent rust in the wet climate.
The ledger connection must keep the home’s drainage system intact. We place continuous Z-flashing above the ledger, overlapping it under the wall’s weather-resistant barrier. This way, any water running down the siding is directed outward. This stops moisture from gathering behind the cover and causing rot or mold in the wall sheathing.
To resist wind uplift, the frame is connected to the house with structural screws placed every 16 inches. For freestanding covers, posts are secured with embedded brackets that handle lateral loads from winter storms. The roof panels are designed to bend slightly under snow load without breaking, then return to their original shape.
Permit Requirements in Edgemont
In the District of North Vancouver’s Zoning Bylaw 3210, trellises, pergolas, and similar open-sided structures are allowed in single-family residential zones as accessory structures only if they do not exceed about 18 m² (194 sq ft) in total area. Their overhead framing members must be spaced so that at least 80% of the horizontal surface remains open to the sky. This means that open pergolas are treated as small, mostly uncovered accessory structures. Larger or more solid patio covers may be regulated as covered decks or other buildings, which can trigger different zoning or permit requirements.
The District of North Vancouver’s Noise Regulation Bylaw 7188 regulates construction noise. This includes noise from building or modifying patio covers and pergolas. This bylaw restricts work hours and maximum sound levels. It prohibits construction noise during the night and limits work on weekends and statutory holidays. Contractors may need an exemption for work outside the normal permitted hours and can be ticketed if patio cover or pergola construction disturbs neighbors beyond the bylaw’s limits.
The District of North Vancouver building department provides guidance for decks in single-family zones. This guidance outlines when a building permit is required and the application process for exterior structures associated with decks. For homes where a patio cover or pergola is integrated with a deck, the project can be treated as deck construction or alteration. Homeowners typically must follow the deck permit process, including submitting plans for review to ensure compliance with zoning and building safety standards.
